Hydraulic cylinders production technologies
Equipment
WPV 301
Welding positioner for connection threads
 |
The WPV 301 welding positioner has been designed for welding connection-threads.
The machine is made of a steel frame supporting the following parts:
- Torch support turntable;
- Pneumatic positioner cylinder;
- Torch sheath suspension arm;
- Adjustable support;
- Control panel;
- Pneumatic sub assembly with filter ;
- Lubricator .
All moving parts are enclosed by a protective steel guard for safety.
The machine should be located inside a welding cabin equipped according to law. |
Technical data and dimensions
| Parameter |
Value |
| Power supply (options on demand) |
220 V 50 Hz |
| Operating pressure |
6-10 Bar |
| Height |
2300 mm |
| Length |
1300 mm |
| Width |
750 mm |
| Loadless weight |
150 kg |
| Chuck revolution time |
4 sec ÷ 3 min |
Safety :
1. Acoustic
Average fixed level of acoustic pressure is equivalent: - <70 dB in working area during operation of machine
- <50 dB in other areas of machine
2. Vibration
The plant is designed and mounted so that vibration does not influence dangerous situations.
3. Compliance to restrictions of the E-field radiation level:
-The plant is designed so that it is not a subject to standards of E-field radiation protection;
-Results of researches are evidence of proving that E-field radiation is within norm, anticipated by standard EN5OO81-1, which is currently in force in EU countries (Compliance to restrictions of the E-field radiation level. Generalized standard of contaminants emissions – Part I – Environment in residential area).
WPB 200
Welding-positioner for end-plugs and ends
 |
The WPB 200 welding positioner has been designed for welding end-plugs and ends.
The machine is made of a steel frame supporting the following parts:
-Torch supporting arm;
-Reclined rotating table;
-Pneumatic footstock;
-Self-centering chuck;
-Control panel;
-Pneumatic sub assembly with filter;
-Lubricator .
All moving parts are enclosed by a protective steel guard for safety.
The machine should be located inside a welding cabin is equipped according to law. |
Technical data and dimensions
| Parameter |
Value |
| Power supply (options on demand) |
220 V 50Hz |
| Operating pressure |
6-10 Bar |
| Height |
1600 mm |
| Length |
1650 mm |
| Width |
1150 mm |
| Loadless weight |
280 kg |
| Chuck revolution time |
10 sec ÷ 3 min |
Safety :
1.Acoustic
Average fixed level of acoustic pressure is equivalent:
- <70 dB in working area during operation of machine; - <50 dB in other areas of machine.
2.Vibration
The plant is designed and mounted so that vibration does not influence dangerous situations.
3.Compliance to restrictions of the E-field radiation level:
-The plant is designed so that it is not a subject to standards of E-field radiation protection.
-Results of researches are evidence of proving that E-field radiation is within norm, anticipated by standard EN5OO81-1, which is currently in force in EU countries (Compliance to restrictions of the E-field radiation level. Generalized standard of contaminants emissions – Part I – Environment in residential area)
WTP 150
Positioning bench
|
|
The bench WTP 150 is designed for the tack welding of the parts to be welded afterwards. It enables the tack welding of any kind of attachment, both ball joints and bushes.
The core of the bench is the self-centering vice, which enables the operator to rotate the piece to be welded, as well to lift or to lower it, so that to find the right position easily and quickly.
Tubes and rods, after being correctly positioned by the operator, are fixed on the rest with a pneumatic cylinder. |
Technical data and dimensions
| Parameter |
Value |
| Operating pressure |
6-10 Bar |
| Height |
1500 mm |
| Length |
1900 mm |
| Width |
600 mm |
| Loadless weight |
120 kg |
| Self-centering vices maximum opening |
145 mm |
WMGK 00
Press for rod and piston seals assembling
|
|
Manual press prearranged for a quick replacement of the pressers.
A reliable partner on assembly bench. By preventing any damage to the seals, it will make job easier, safer, more productive and enjoyable.
ROD:
Funnels and PM presser for rod seals assembling are available in the diameters: 16, 20, 22, 25, 30 and other diameters on request.
PISTON:
By replacing the funnel and the PM presser with cones and PF presser, it can be used the same press to assemble piston seals for the following diameters: 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80 and other diameters on request.
| |
