TS…C

Design features. hydraulic welded end for light application produced in accordance with regulation DIN 648 series E, C shape rod having a central join on the bottom of the connector welding at 45º, needs relubricating.
The housing is made of St 52-C3 steel.
Field of application. rod end for range of links of cylinders, normally applied to the bottom of the hydraulic cylinder and the piston rod end.

TS…N

Design features. hydraulic welded rod end, heavy application, connector to fix to the rectangular base and without central pivot. Needs lubricating. Equipped with bearing in accordance with regulation DIN 648 E shape. The head is made of steel St 52-C3.
Field of application. rod end for heavy application to be welded to the bottom of the hydraulic cylinders. Dismountable bearing.

TS…NF

Design features. hydraulic welded rod end, connector to base. Needs lubricating. Equipped with bearing in accordance with regulation DIN 648 E shape.

Field of application. rod end for heavy application to be welded to the bottom of the hydraulic cylinders. Dismountable bearing.

TS…CE - N

Design features. hydraulic welded rod end with similar characteristics to the TS…N type, differing in the bearing. In fact this end was produced in accordance with CETOP (like the TAPR…CE type). Needs lubricating. Head produced in St 52-C3, with central join.
Field of application. for hydraulic cylinders produced in accordance with CETOP and DIN 24333, DIN 24336 and ISO 6020/I, ISO 6022.

TAPR…N

Design features. Hydraulic rod end with internally threaded connector for heavy performance, relubricated by way of a grease lubricator in the terminal and through the pivot. The body is made of C45 steel cut. From 90º diameter is cut from rounded cast iron. Bearing according to DIN 648, E serie, fixed at the head with rings. With grease nipple.
Field of application. particularly recommended for hydraulic cylinders, where design allows maximum stroke length with minimum closed centers.

TAPR…U

Design features. Hydraulic ends with an internally threaded connector, relubricated through  a grease lubricator in the rod end and through the pivot. It differs from the previous type because the connector is grooved so as to produce a locking device with two hexagonal screws, according to DIN 912.
Field of application. same applications are the TAPR…N series but with the advantage that it guarantees better and greater fixing to the pivot thread.

TAPR…U GAS

Design features. Hydraulic ends with an internally threaded connector, relubricated through  a grease lubricator in the rod end and through the pivot. It differs from the previous type because the connector is grooved so as to produce a locking device with two hexagonal screws, according to DIN 912.
Field of application. same applications are the TAPR…N series but with the advantage that it guarantees better and greater fixing to the pivot thread.

TAPR…CE

Design features. Hydraulic rod end with connector having a longer internal thread than that of the TAPR…N and TAPR…U series. Designed with a threaded location system given that the connector is groove, an be relubricated through a grease lubricator in the end through the pivot. This type was designed in accordance with regulation DIN 24338 for assembly on to hydraulic cylinders. The internal ring is characterized by cylindrical extension on all sides so that the diameter of the bore corresponds with the width of the ring. The body is made from C45 steel cut. From diameter 70º is made from rounded cast iron.
Field of application. for cylinders made in accordance with CETOP RP 58 H, DIN 24333, DIN 24336, ISO 6020/1 and ISO 6022; can be used also for the other types.

TAPR…S

Design features. Hydraulic ends with internally threaded connector, relubricated by way of a grease lubricator in the housing and through the pivot. According to DIN 24555, the body is made in C45 steel cut from diam. 12 to diam. 50. From diam. 60 to diam. 100 is cut from rounded cast-iron. Spherical plain bearings according to DIN 648 E shape (ISO 6124/1, E serie). The connector is grooved so as to produce a locking device with two hexagonal screws according to DIN 912.
Field of application. these are recommended for 160 bar hydraulic cylinders according to DIN 24554-ISO 6020/2.

TFI…FK                       …FK-2RS
TFI…FK MAGGIORAT  …FK-2RS MAGGIORAT

TFE…MK                       …MK-2RS
TFE…MK MAGGIORAT  …MK-2RS MAGGIORAT

Design features. Regulation DIN 648 E series ends, produced in C45 steel zinc plated to protect against corrosion. Available with an internal thread – TFI-series – or external – TFE-series – right or left handed according to DIN 648, E serie, lubricated through a grease nipple or a hole. Also with the version of higher thread. See also TFI-TFE higher diameter from Ø40 to Ø80.
Field of application. end recommended for application with high alternate loads and shock loads. Long registered thread.

TFI                                …U/UB
TFI…FKB                    …T-2RS
TFI…MAGGIORAT       …T-2RS MAGGIORAT
TFE…MKB                   …T-2RS
TFE…MAGGIORAT        …T-2RS MAGGIORAT

Design features. regulation DIN 648 series K ends like above but maintenance free. The internal bearing has an inside ring made by steel with PTFE.
Field of application. ideal for use with constant uniform loads and slow movements for swinging corners.

SR…

BO…

IF…

KPL…

>

KPC… / KPD…

KP…

THREADED FORKS / WELDED FORKS

I…SB / I…DIN / E…DIN